Terminal Pin Names

<< Click to Display Table of Contents >>

Navigation:  Parts > Creating Parts > Symbols > Terminals >

Terminal Pin Names

The terminal name is the name you give to the physical connection of the device the part represents. It is generally the device pin leads. Conventionally you will use the name in the devices data sheet. Often it is a number but  sometimes it is a character and a number. With AutoTRAX you can name your pins with any combination or number of characters and digits.

AutoTRAX does not use the pin name electrically. It uses an internal unique id for each electrical connection on the device.

A pad in the part's footprint is the embodiment of the connection.

AutoTRAX records the pin name in the pad. If you  rename it in the symbol, the name in the pad is changed.

Terminals with no associated pads do not display a pin name. Instead they display a no connection symbol.

clip1118

 

Symbol terminals with no associate pad.

clip1119

You can mark a terminal as not having an associated pad by checking the No Footprint Pad in the terminals properties panel

clip1120

You can change the associated pad for a terminal by selecting the pin name in the  terminals properties panel

clip1106

Pin names - numeric and non-numeric

 

clip1107

You can set the font, size and color for each terminal

 

clip1108

Names and pin names can be moved independently

 

clip1109

The name and pin name can be independently hidden